High-grade intercepts from Omega and Kingfisher Drilling
Released
Released
Announcement PDF
ASX RELEASE
29 April 2026
Horizon Gold Limited ACN: 614 175 923
Suite 8, Level 3, 47 Havelock Street, West Perth WA 6005 | PO Box 39, West Perth WA 6872
Telephone: +61 8 6331 6092 | Email: info@horizongold.com.au | Website: www.horizongold.com.au
1
Gum Creek Gold Project
High-grade intercepts returned from Omega and Kingfisher
Diamond Drilling
HIGHLIGHTS
Significant intercepts returned from four diamond holes drilled at the Omega Prospect included:
14m @ 2.87g/t Au from 337m including 8m @ 4.60g/t Au from 342m
5m @ 3.81g/t Au from 325m
1m @ 5.46g/t Au from 359m
1m @ 5.35g/t Au from 334m
5m @ 2.69g/t Au from 363m
4m @ 2.49g/t Au from 376m
5m @ 3.07g/t Au from 374m
Drilling at Omega has extended the high-grade gold mineralisation down plunge beneath the
existing workings by over 120m and provided critical information about the controls on
mineralisation at the prospect. A revised 3D model has been developed in advance of completing
a maiden MRE.
Significant intercepts returned from three diamond holes drilled at the Kingfisher Prospect included:
5m @ 2.42g/t Au from 338m including 3m @ 3.56g/t from 338m
4m @ 2.37g/t Au from 407m including 1m @ 8.09g/t Au from 408m
1m @ 4.14g/t Au from 455m
2m @ 4.61g/t Au from 538m including 1m @ 8.65g/t Au from 538m
The drilling at Kingfisher has expanded the margins of the existing resource model and confirmed
the existing geological interpretation. Deep infill and extensional resource drilling at the Prospect
is underway.
________________________________________________________________________________
Horizon Gold Limited (ASX : HRN) (Horizon or Company) is pleased to announce significant gold
intercepts returned from diamond drilling at its 100% owned Gum Creek Gold Project (Gum Creek or
the Project) located in the Mid-West Region of Western Australia. Final assay results for four holes
drilled at the Omega Prospect and three holes drilled at the Kingfisher Prospect have been received
(Figure 1).
2
Figure 1: Gum Creek Gold Project existing Mineral Resources, Potential
Mineral Resources and Exploration Targets over simplified geology.
Managing Director Scott Williamson said:
“These are outstanding results that continue to validate our strategy of unlocking high-grade gold
beneath Gum Creek's historic underground workings.
At Omega, we've hit significant high-grade mineralisation over 120 metres down plunge beneath the
existing underground mine. This confirms we have further underground mining opportunities at Omega,
and we're only just getting started.
At Kingfisher, drilling is confirming and expanding our geological model, we’ve moved to two diamond
rigs around the clock as we drive toward a resource upgrade for the Gum Creek Project over the
coming months.
With a 2.3 million ounce resource base, a Feasibility Study on track for completion mid-year, and a
gold price environment that only strengthens our investment case, Gum Creek is rapidly advancing
towards development. The momentum across the project is building, and we look forward to delivering
further results in the coming weeks.”
3
Omega Prospect
The Omega Prospect is located 44km north of the Gidgee Mill. The Prospect has been mined
historically by two open cuts (Omega North and Omega South) and one underground operation
(Omega South) over a strike length of ~300m. The Prospect is not in the Company’s current Mineral
Resource Estimate (MRE).
The Company completed four diamond holes at the Omega Prospect for a total of 1,725.2m. The
program aimed to test for extensions to high-grade mineralisation beneath impressive previous drill
intercepts including 30m @ 21.1g/t Au from 57m and 13m @ 10.8g/t Au from 122m1
. Assays received
from the four holes have extended the high-grade gold mineralisation down plunge beneath the existing
workings by over 120m and provided critical information about the controls on gold mineralisation at
the prospect. Numerous significant intercepts were returned (Figure 2 & Table B) including:
17m @ 1.40g/t Au from 315m including 5m @ 3.81g/t Au from 325m (OMDD001)
14m @ 2.87g/t Au from 337m including 8m @ 4.60g/t Au from 342m (OMDD001)
16m @ 1.30g/t Au from 336m including 2m @ 2.28g/t Au from 349m (OMDD002A)
1m @ 5.46g/t Au from 359m (OMDD002A)
20m @ 0.93g/t Au from 325m including 1m @ 5.35g/t Au from 334m (OMDD003)
10m @ 1.70g/t Au from 360m including 5m @ 2.69g/t Au from 363m (OMDD003)
8m @ 1.60g/t Au from 373m including 4m @ 2.49g/t Au from 376m (OMDD003)
11m @ 1.57g/t Au from 371m including 5m @ 3.07g/t Au from 374m (OMDD004)
Gold mineralisation at Omega is hosted by Banded Iron Formation (BIF) with high-grade lodes formed
at the intersection of north-south trending quartz filled sinistral faults and breccia zones within a steep
south plunging BIF fold closure. A detailed structural analysis of the diamond core is underway prior to
planning further deep infill and extensional diamond drilling.
1 Refer to Horizon Gold Limited ASX announcement titled “Gum Creek Geological Review” dated 15 February 2021
4
Figure 2: Omega Prospect long section showing historic open pits, underground infrastructure, interpreted high-grade ore
shoots and gold intercept gram x metre pierce points with recent drilling intercepts >5 GxM, and historic unmined drilling
intercepts >30 GxM (labelled).
Kingfisher Prospect
The Kingfisher Prospect is located 3.5km south-southeast of the Gidgee Mill and hosts a current open
cut MRE of 1.22Mt @ 2.01g/t Au for 78,900oz and an underground MRE of 1.04Mt @ 3.38g/t Au for
113,500oz (Table A).
Assay results from the final three holes of the initial seven-hole diamond program have now been
received. The Kingfisher drill program aimed to test high priority targets down plunge of previous high
grade drill intercepts including 15m @ 28.5g/t Au from 346m and 10m @ 8.9g/t Au from 190m2
.
Numerous significant intercepts were returned (Figures 3 & 4, Table C) including:
5m @ 2.42g/t Au from 338m including 3m @ 3.56g/t from 338m (KFDD006)
4m @ 2.37g/t Au from 407m including 1m @ 8.09g/t Au from 408m (KFDD006)
8m @ 0.86g/t Au from 440m including 1m @ 3.96g/t Au from 444m (KFDD006)
1m @ 4.14g/t Au from 455m (KFDD006)
2m @ 4.61g/t Au from 538m including 1m @ 8.65g/t Au from 538m (KFDD008)
2
Refer to Horizon Gold Limited ASX announcements titled “Diamond drilling returns 15m @ 28.5g/t Au from Kingfisher" dated 12 December
2022 and “Outstanding gold intercepts returned from Gum Creek Diamond Drilling” dated 15 March 2022.
5
Gold mineralisation at Kingfisher is located within several moderately southwest-dipping, planar gold
lodes within a 60m wide, 1.2km long shear zone that remains open to the north, south and at depth.
The lodes are interpreted to contain moderately south plunging high grade gold shoots forming part of
a large en-echelon vein array that steps down to the north.
Figure 3: Kingfisher Prospect long section showing interpreted high-grade gold shoots, intercept pierce points
(coloured by GxM), recent drilling intercepts >7 GxM, and historic unmined drilling intercepts >30 GxM.
The recent seven hole diamond program has confirmed our current geological model by identifying
additional high-grade intercepts including 4m @ 11.4g/t Au from 431m3
within the lower part of the
central gold shoot; by defining the southern / lower margin of the central shoot; and by discovering a
third shoot approximately 200m down plunge to the north in hole KFDD007 (including 4m @ 2.6g/t Au
from 438m). Deep diamond drilling is currently testing the extent of the newly discovered mineralised
shoot to the north with two double-shift diamond rigs now on site. Additional diamond drilling will also
focus on increasing resource confidence (inferred to indicated) within the upper and central high-grade
shoots.
RC drilling is also continuing at the Swan/Swift, Kingfisher and Howards prospects with a focus on
expanding shallow, free milling gold mineralisation.
3 Refer to Horizon Gold Limited ASX announcements titled “High-grade intercepts returned from Kingfisher Diamond Drilling” dated 23
February 2026.
6
Figure 4: Kingfisher cross section showing mineralised zones within the Gidgee
Shear Zone, KFDD006 drill intercepts >7 GxM and historic drill intercepts >5
GxM.
Feasibility Study Progress
The Gum Creek Feasibility Study (FS) is progressing well, with surface and groundwater modelling
and cost estimates now completed, risk assessments well advanced, and FS report writing underway.
The Study remains on schedule for completion H1 CY 2026.
The Company believes the Gum Creek Gold Project will be a robust, viable stand‐alone mining
operation with the recent high gold prices only strengthening the March 2024 Scoping Study outcomes4
and providing a high level of confidence for the current Feasibility Study outcomes. Preparation work
for mine development and mine closure plan and associated applications has commenced.
4
Refer to Horizon Gold Limited ASX announcement titled “Compelling Gum Creek Scoping Study” dated 20 March 2024.
7
About the Company
Horizon Gold Limited (ASX:HRN) is an exploration company focused on its 100% owned Gum Creek
Project in Western Australia (Figure 5). The Gum Creek Gold Project represents an exciting gold
exploration and potential development opportunity that currently contains a Mineral Resource Estimate
of 37.97Mt @ 1.89g/t Au for 2.30 million ounces5
(Table A) including Indicated and Inferred resource
classifications in accordance with the Australasian Code for Reporting of Identified Mineral Resources
and Ore Reserves (JORC Code 2012 edition). The indicated portion of the MRE is 26.72Mt @ 1.90g/t
Au for 1.63 million ounces, representing 71% of the total resource ounces.
Figure 5: Gum Creek Gold Project and surrounding gold resources and operating gold processing facilities.
5
Refer to Horizon Gold Limited ASX Announcement titled “Gum Creek Project Gold Resource Update” dated 4 November 2025.
8
Horizon Gold Limited Mineral Resources
Table A: Gum Creek Gold Resources as at 4 November 2025
Resource
Resource
Date
Cut-off
grade
(g/t Au)
Indicated Inferred Total
Tonnes
Au
(g/t)
Gold (oz) Tonnes
Au
(g/t)
Gold
(oz)
Tonnes
Au
(g/t)
Gold (oz)
Swan/Swift OC Nov-25 0.4 6,661,000 1.86 399,000 335,000 1.54 16,600 6,996,000 1.85 415,600
Swan UG* Nov-25 1.5 935,000 4.45 133,700 798,000 3.90 100,000 1,733,000 4.19 233,700
Swift UG* Nov-25 1.5 35,000 2.22 2,500 813,000 2.54 66,300 848,000 2.52 68,800
Wilsons UG* Nov-25 1.5 2,759,000 4.37 387,400 126,000 3.16 12,800 2,885,000 4.31 400,200
Howards Nov-25 0.4 6,095,000 1.13 221,800 751,000 0.97 23,500 6,846,000 1.11 245,300
Kingfisher OC Nov-25 0.6 1,139,000 2.05 75,100 79,000 1.50 3,800 1,218,000 2.01 78,900
Kingfisher UG* Nov-25 1.5 94,000 2.71 8,200 949,000 3.45 105,300 1,043,000 3.38 113,500
Heron May-23 0.6 330,000 2.11 22,400 1,822,000 1.51 88,200 2,152,000 1.60 110,600
Eagle Nov-25 0.4 817,000 1.27 33,400 1,202,000 1.29 50,000 2,019,000 1.28 83,400
Heron South May-23 0.8 720,000 1.79 41,400 761,000 1.53 37,500 1,481,000 1.66 78,900
Shiraz Nov-25 0.4 1,947,000 1.04 65,400 372,000 0.94 11,200 2,319,000 1.03 76,600
Wyooda** Nov-25 0.8 557,000 1.54 27,500 718,000 1.56 36,100 1,275,000 1.55 63,600
Snook Jul-22 0.8 75,000 2.57 6,200 846,000 1.76 47,800 921,000 1.82 54,000
Toedter Nov-25 0.6 905,000 1.31 38,200 99,000 1.32 4,200 1,004,000 1.31 42,400
Hawk Nov-25 0.6 591,000 1.38 26,200 167,000 1.27 6,800 758,000 1.35 33,000
Specimen Well Nov-25 0.6 431,000 1.49 20,600 114,000 1.31 4,800 545,000 1.45 25,400
Wedge Nov-25 0.6 427,000 1.42 19,500 56,000 2.83 5,100 483,000 1.58 24,600
Camel Bore Jul-22 0.8 379,000 1.47 17,900 100,000 1.21 3,900 479,000 1.42 21,800
Melbourne Bitter Nov-25 0.6 318,000 1.46 14,900 157,000 1.27 6,400 475,000 1.39 21,300
Hyperno-Reliance Nov-25 0.6 295,000 1.52 14,400 183,000 1.02 6,000 478,000 1.33 20,400
Kearrys May-23 0.6 450,000 1.24 18,000 46,000 1.35 2,000 496,000 1.25 20,000
Psi Jul-22 0.8 100,000 2.08 6,700 226,000 1.69 12,300 326,000 1.81 19,000
Deep South
Reliance
Nov-25 0.6 229,000 1.53 11,300 17,000 0.91 500 246,000 1.49 11,800
Orion Jul-22 0.8 69,000 1.49 3,300 182,000 1.40 8,200 251,000 1.43 11,500
Eagles Peak May-23 0.6 264,000 1.19 10,100 41,000 0.99 1,300 305,000 1.16 11,400
Wahoo Jul-22 0.8 - - - 258,000 1.25 10,400 258,000 1.25 10,400
Fangio May-23 0.6 99,000 1.32 4,200 30,000 1.35 1,300 129,000 1.33 5,500
Total 26,721,000 1.90 1,629,300 11,248,000 1.86 672,300 37,969,000 1.89 2,301,600
* Cut-off grades for Swan, Swift, Wilsons and Kingfisher underground Indicated and Inferred are 1.5g/t Au.
** Wyooda includes the Kingston Town, Think Big and Manikato resources which are within 600m and 200m of each other respectively.
Note: Figures have been rounded.
9
Table B: Significant Drill Hole Intercepts (>2 GxM) – Omega Diamond Drilling
Hole ID East North RL Dip Azi Depth From To Width Au g/t
OMDD001 736396.2 7027064.9 606.6 -64.5 103.5 402.9 315 332 17 1.40
incl. 325 330 5 3.81
337 351 14 2.87
incl. 342 350 8 4.60
OMDD002A 736396.1 7027014.4 607.5 -66.8 88.9 417.9 330 333 3 0.94
336 352 16 1.30
incl. 349 351 2 2.28
359 360 1 5.46
363 367 4 0.95
incl. 366 367 1 2.66
OMDD003 736399.6 7027007.5 607.9 -71.0 91.2 450.6 325 345 20 0.93
incl. 325 326 1 3.06
and 334 335 1 5.35
348 349 1 2.79
360 370 10 1.70
incl. 363 368 5 2.69
373 381 8 1.60
incl. 376 380 4 2.49
OMDD004 736410.5 7026985.0 608.9 -67.0 95.7 453.8 371 382 11 1.57
incl. 374 379 5 3.07
Notes: All coordinates are GDA94 zone 50, all intercepts use a 0.2 g/t Au lower cut, no upper cut, 2m maximum internal dilution and all
intercepts >2.0 GxM are reported.
Table C: Significant Drill Hole Intercepts (>2 GxM) – Kingfisher Diamond Drilling
Hole ID East North RL Dip Azi Depth From To Width Au g/t
KFDD005W1 739848.4 6979699.8 518.8 -80.8 50.5 398.3 NSR
KFDD006 739755.7 6979810.2 514.4 -78.0 45.4 522.9 182 183 1 2.79
318 325 7 0.82
Incl. 321 322 1 2.97
338 343 5 2.42
Incl. 338 341 3 3.56
376 378 2 1.20
407 411 4 2.37
Incl. 408 409 1 8.09
422 426 4 0.55
435 436 1 0.82
440 448 8 0.86
Incl. 444 445 1 3.96
455 456 1 4.14
459 460 1 1.91
KFDD008 739758.5 6979772.8 514.2 -80.7 50.1 359 366 7 0.42
375 376 1 3.83
444 449 5 0.58
453 454 1 2.30
467 468 1 2.56
514 516 2 1.12
538 540 2 4.61
Incl. 538 539 1 8.65
Notes: All coordinates are GDA94 zone 50, all intercepts use a 0.2 g/t Au lower cut, no upper cut, 2m maximum internal dilution and all
intercepts >2.0 GxM are reported. NSR = no significant result >2 GxM.
This ASX announcement was authorised for release by the Horizon Board.
10
For further information contact:
Scott Williamson
Managing Director
+61 8 9336 3388
Competent Persons Statement:
The information in this announcement that relates to exploration activities, exploration results and Mineral Resources is based
on information compiled by Mr Leigh Ryan, who is a member of The Australasian Institute of Geoscientists. Mr Ryan is the
General Manager - Exploration at Horizon Gold Limited and holds shares and options in the Company, Mr Ryan has sufficient
experience, which is relevant to the style of mineralisation and type of deposit under consideration and to the activity which
he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the "Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves. Mr Ryan consents to the inclusion in the report of the matters
based on information provided in the form and context in which it appears.
No New Information or Data:
This announcement contains references to Mineral Resource estimates, all of which have been cross referenced to previous
market announcements. The Company confirms that it is not aware of any additional information or data that materially affects
the information included in the relevant market announcements and, in the case of estimates of Mineral Resources, that all
material assumptions and technical parameters underpinning the estimates in the relevant market announcement continue
to apply and have not materially changed.
Forward Looking Statements:
This ASX announcement may contain certain “forward-looking statements” which may not have been based solely on
historical facts but rather may be based on the Company’s current expectations about future events and results. Where the
Company expresses or implies an expectation or belief as to future events or results, such expectation or belief is expressed
in good faith and believed to have a reasonable basis. However, forward looking statements are subject to risks, uncertainties,
assumptions and other factors, which could cause actual results to differ materially from future results expressed, projected
or implied by such forward-looking statements. Such risks include, but are not limited to metals price volatility, currency
fluctuations, as well as political and operational risks and governmental regulation and judicial outcomes.
11
APPENDIX 2: JORC TABLE 1 (SECTIONS 1 AND 2)
Section 1 - Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or
handheld XRF instruments, etc).
These examples should not be taken
as limiting the broad meaning of
sampling.
• Include reference to measures taken
to ensure sample representivity and
the appropriate calibration of any
measurement tools or systems used.
• Aspects of the determination of
mineralisation that are Material to the
Public Report.
• In cases where „industry standard‟
work has been done this would be
relatively simple (eg „reverse
circulation drilling was used to obtain
1 m samples from which 3 kg was
pulverised to produce a 30 g charge
for fire assay‟). In other cases more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types
(eg submarine nodules) may warrant
disclosure of detailed information.
• HQ3 and NQ2 diamond core was drilled to various depths using a truck-
mounted DRA 800 diamond drill rig.
• Selected diamond core was cut in half using an on-site Almonte
diamond saw and sampled at 1m intervals over mineralised intervals
selected by the supervising geologist.
• Sampling was undertaken using Horizon Gold Limited (HRN) sampling
protocols and QAQC procedures in line with industry best practice, with
laboratory standard reference material, sample blanks and sample
duplicates inserted/collected at every 25th sample in the sample
sequence.
• Half core diamond samples were submitted to Australian Laboratory
Services (ALS) in Perth for preparation (including pulverising) to
produce a 50g sub-sample for analysis for gold by 50g Fire Assay.
Pre-2014 Drillholes
• Diamond drilling involved HQ3 and NQ2 core. Sampling of diamond
core involved 1m sampling, with sampling over geological intervals
(down to 0.1m) in more recent holes. The diamond core has generally
been cut in half for sampling with some holes whole core sampled, and
some quarter core sampled subsequent to half core sampling where
alternate laboratory samples were submitted or thin section work was
completed.
• Initially assaying utilised the aqua regia process but most assays used
in this report have been by fire assay with an AAS finish using the site
laboratory or off-site laboratories. A 50g charge was generally used.
• All RC samples were collected at 1m intervals through the drill rig
cyclone and then split via riffle and cone splitters. RC samples were
typically dry. Composite samples were collected by tube sampling the
bulk RC sample bags.
Drilling
techniques
• Drill type (eg core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (eg core
diameter, triple or standard tube,
depth of diamond tails, face-
sampling bit or other type, whether
core is oriented and if so, by what
method, etc).
• Diamond core was drilled from surface to facilitate geotechnical logging
and sampling from surface. Industry standard barrels and triple tube
barrels were used to obtain HQ3 and NQ2 core samples.
• Diamond core holes were routinely surveyed for down hole deviation
using a DeviGyro set to collect continuous readings every 5m down
each hole.
• HQ3 and NQ2 core was orientated using Reflex orientation tools, with
core initially cleaned and pieced together at the drill site. Core was then
reconstructed into continuous runs on an angle iron cradle for down hole
depth marking and then orientated with orientation lines marked up by
HRN field staff at the Gidgee Core Shed.
Pre-2014 Drillholes
• Diamond drilling was completed with industry standard diamond drill
rigs acquiring HQ (63.5mm) or NQ (47.6mm) diamond core with a
standard tube and all core oriented whenever possible.
• Only some of the pre-2014 diamond core was oriented and some
orientation marks have since faded or disappeared.
• RC drilling was completed with industry standard RC drill rigs using a
4.5” to 5.5” drill bit with either a cross-over sub or a face sampling
hammer.
12
Criteria JORC Code explanation Commentary
Drill sample
recovery
• Method of recording and assessing
core and chip sample recoveries and
results assessed.
• Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
• Whether a relationship exists
between sample recovery and grade
and whether sample bias may have
occurred due to preferential
loss/gain of fine/coarse material.
• Diamond drillers measure core recoveries for every drill run completed
using either three or six metre core barrels. The core recovered is
physically measured by tape measure and the length is recorded for
every “run”. Core recovery is calculated as a percentage recovery. Core
recovery is confirmed by Horizon field technicians and geologists during
core orientation activities on site and recorded into the database.
• Various diamond drilling additives (including muds and foams) were
used to condition the drill holes and maximise recoveries and sample
quality.
• There is no significant loss of material reported in the mineralised parts
of the diamond core intercepts reported.
• The diamond core sample recovery and quality is considered to be
adequate for the drilling technique employed.
Pre-2014 Drillholes
• Diamond core recovery was noted during the drilling and geological
logging process as a percentage of core recovered vs. expected drill
length.
• Where documented, RC drilling returned good recoveries, however drill
recoveries for some historical holes are not known.
• All RC samples were split and mixed in the riffle splitting process.
• There is no evidence of there being sample bias due to non-
representative or preferential sampling.
• No apparent relationships were noted in relation to sample recovery and
grade.
Logging • Whether core and chip samples
have been geologically and
geotechnically logged to a level of
detail to support appropriate Mineral
Resource estimation, mining studies
and metallurgical studies.
• Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc) photography.
• The total length and percentage of
the relevant intersections logged.
• All diamond drill holes were geologically logged by a qualified Geologist.
• Qualitative and quantitative geological logging recorded colour, grain
size, weathering, oxidation, lithology, alteration, veining and
mineralisation including the abundance of specific minerals, veining,
and alteration using an industry standard logging and geological coding
system.
• Structural measurements of foliation, shearing, faulting, veining,
lineations etc. (using a kenometer to collect alpha and beta angles) were
collected for all diamond core. These measurements were then plotted
down drill traces in 3D software to aid geological interpretations and
modelling of gold mineralisation.
• Rock Quality Designation (RQD) measurements are completed on all
diamond core.
• All diamond core is photographed in the core tray in both dry and wet.
Pre-2014 Drillholes
• All historical drill holes have been logged using the various company
logging codes. The type of drill log varies with time depending on drill
technique, year and company.
• Logging included codes and descriptions of weathering, oxidation,
lithology, alteration and veining.
• Geological logging is qualitative and based on visual field estimates.
• Not all RC & diamond core logs have been converted to a digital format.
Sub-sampling
techniques and
sample
preparation
• If core, whether cut or sawn and
whether quarter, half or all core
taken.
• If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
• For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
• Quality control procedures adopted
for all sub-sampling stages to
maximise representivity of samples.
• Measures taken to ensure that the
sampling is representative of the in
situ material collected, including for
• Core samples were cut in half using an auto feed Almonte diamond core
saw. Half core samples were collected for assay except duplicate
samples which are quarter core. All remaining core is retained and
stored in core trays on site.
• Sample preparation was undertaken by ALS Perth.
• At the laboratory, samples were weighed, dried and crushed to -6mm.
The crushed sample was subsequently bulk-pulverised in an LM5 ring
mill to achieve a nominal particle size of 85% passing <75um.
• Sample sizes and laboratory preparation techniques are considered to
be appropriate for the commodity being targeted.
Pre-2014 Drillholes
• DD has involved HQ and NQ core sizes. Sampling of diamond core has
involved 1m sampling, with sampling over geological intervals (down to
13
Criteria JORC Code explanation Commentary
instance results for field
duplicate/second-half sampling.
• Whether sample sizes are
appropriate to the grain size of the
material being sampled.
0.1m) in more recent holes. The diamond core has generally been cut
in half for sampling however some holes are whole core sampled and
some quarter core sampled or quarter core sampled subsequent to half
core sampling where alternate laboratory samples were submitted or
thin section work was completed.
• RC sampling involved 1m RC cuttings, split using riffle splitter in dry
materials and a wedge splitter or rotary splitter in wet materials. Usually
a 2 - 3kg sample was retained.
• Where it has been suspected that drillholes were drilled down dip,
scissor holes have been drilled.
• Most drilling showed good sample recovery with the exception of some
holes drilled in 1989. There is no stated evidence of there being sample
bias due to preferential sampling. There is no relationship between
sample recovery and grade.
• Sample sizes and laboratory preparation techniques are considered to
be appropriate for the commodity being targeted.
Quality of assay
data and
laboratory tests
• The nature, quality and
appropriateness of the assaying
and laboratory procedures used and
whether the technique is considered
partial or total.
• For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the parameters
used in determining the analysis
including instrument make and
model, reading times, calibrations
factors applied and their derivation,
etc.
• Nature of quality control procedures
adopted (eg standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (ie lack of bias) and precision
have been established
• Analysis for gold only was undertaken at ALS Perth using 50g Fire
Assay with AAS finish to a lower detection limit of 0.01ppm. Fire assay
is considered a “total” assay technique.
• No geophysical tools or other non-assay instrument types were used in
the analyses reported.
• Review of routine standard reference material and sample blanks
suggest there are no significant analytical bias or preparation errors in
the reported analyses.
• Results of analyses from field sample duplicates are consistent with the
style of mineralisation being evaluated and considered to be
representative of the geological zones which were sampled.
• Internal laboratory QAQC checks are reported by the laboratory.
• Review of the internal laboratory QAQC suggests the laboratory is
performing within acceptable limits.
Pre-2014 Drillholes
• Initially, assaying utilised the aqua regia process but most assays
referred to in this report have been by fire assay with an AAS finish using
the site laboratory or off-site laboratories. A 50g charge was used. After
2000, samples were assayed at the Gidgee accredited mine-site
laboratory using the Leachwell method with approximately 30g of
sample pulverised to 85% passing -200 mesh. The analytic techniques
are considered appropriate. Where coarse gold occurred, offsite screen
fire assaying was carried out using a 105 micron sieve.
• Samples were submitted to off-site laboratories with check assays
carried out in 1988. Further check assays were carried out in other years
however this data has not been analysed. Some CRMs and blank
samples were used prior to 2002 however there is insufficient
information to complete an accurate analysis. There are records of
laboratory standards and blanks having been submitted post 2002 and
an analysis of these shows good correlation between results. No
evidence has been found in the mining process that there were issues
with assaying. An analysis of duplicates showed that in general the
precision of samples was adequate.
Verification of
sampling and
assaying
• The verification of significant
intersections by either independent
or alternative company personnel.
• The use of twinned holes.
• Documentation of primary data,
data entry procedures, data
verification, data storage (physical
and electronic) protoc
Share your feedback
Discover